como solucionar Solidworks simulation: "poisson's ratio should be less than 0.5"?

como solucionar Solidworks simulation: "poisson's ratio should be less than 0.5"?, estoy tratando de hacer una simulacion de un ensamble con varios materiales, se crea la maya pero no me corre el estudio y muestra el mensaje de mas arriba.

SolidworksSimulation
Comments 4
BM
BM 2021-04-08

I dont think you can use a number greater than 0.5 in a continuum mechanics code, at least none that I know of.

SY
SY 2021-04-08

Poisson's ratios exceeding 1/2 are permissible in anisotropic materials. Indeed, hexagonal honeycombs can exhibit Poisson's ratio of 1, and if they have oriented hexagonal cells, greater than 1, in certain directions.

SY
SY 2021-04-08

Poisson's ratio values for different materials

Material

Poisson's ratio

clay

0.30–0.45

stainless steel

0.30–0.31

steel

0.27–0.30

cast iron

0.21–0.26

AB
AB 2025-01-17

I had this problem today. I increased mesh density and the solver worked (Aumentar la densidad de la malla)