Bill of material template enhancement

Why does the BOM template not save all of the settings of a bill of material. We use the FOLLOW ASSEMBLY ORDER on almost all of our BOMs but that has to be toggled ON with every BOM we generate. We've tried saving the BOM template with this set to on but that does not save & make the BOM follow assembly order. I'd like to have that either a default to on or allow the template to set that. After all templates are supposed to be used to help with repetitive tasks. I've generated an enhancement request for this. That number is 1-23713713491

Comments 1
JS
JS 2021-06-25

From the Knowledge Base:

===================================
S-068439

Starting in SOLIDWORKS® 2015, it is possible to save the ‘Follow assembly order’ option within the BOM template. The ‘Follow assembly order’ option is saved as BOM sort option. 

In the SOLIDWORKS® 2015 help menu, refer to ‘Bill of Materials Sort’ and ‘Saving Sort Settings for BOMs’.

Follow these steps to save the ‘Follow assembly order’ option within the BOM template:
1. Right-click a BOM table in an assembly or drawing and choose ‘Sort’ (or ‘Edit Sort’).
2. Enable the option ‘Follow Assembly Order’ option. You can also select the 'Follow Sub-Assembly Order' if needed.
3. Enable the ‘Sort save’ option ‘Save Current sort settings’.
4. Click ‘OK’.
5. Right-click the BOM table, choose ‘Save as’, and save the table as a template.

===================================