V6 ISO based simulation with Hermle C30, iTNC530 - sample video

Hello community,

I want to share a sample video with you to show the embedded ISO based simulation with V6 machining, based on a Hermle C30 with Heidenhain iTNC530 controller. The demo is basing on CENIT's machine bundle for this machine, consiting on a comprehensive postprocessor, a controller emulator and a 3D ressource model of this machine.

The demo process is representing CENIT's reference part that includes all relevant operations - from prismatic contouring operations on various machining planes via cycles up to 5 axis simultaneous operations. All operations that are shown here are fully supported with the postprocessor as well as with the controller emulator.

This machine bundle is available off-the-shelf. If you want to make some tests on your own, feel free to request a temporary evaluation license. This also applies to many other pre-existing machine bundles from Hermle, DMG, Makino, ... For sales terms and conditions please refer to the PLM Marketplace: http://www.plmmarketplace.com/software/post-processing-and-integrated-nc-simulation.html or contact me directly.

Best regards, Jens