How is Pinning vertices supposed to work? All I have found in the User Guide is the following: But this seems like a rather simplified explanation, compared to the behavior I've observed in DG. In my own tests, it seems Pinned Vertices, only remain "fixed" when performing a "Relax" operation. Otherwise, if you perform alignment or subsequent unwrap operations, the pinned vertices will get moved/transformed. Is this expected/correct behavior? And just confusing documentation? Or is this

The toolbox search does not seem to function correctly. When searching for DIN 916 screws, it returns unrelated results instead of the requested item. Please see the attached image. Am I missing something?

I am trying to publish an experience using Play Optimization in the Creative Experience app and I get this error: "An error has occurred! Failed to get packaging parameters. Create a new publication operation and try again" (see attached video). As additional information, I just installed the most recent HotFix 1.34. Recently, I have been having issues when publishing experiences that include simulations results. The problem solved itself somehow after a while, however when I was trying to

I have xDesign for makers and i have every role to me (i'm only one user)and i have only loading screen, xdesign can't load up.

I am trying to open the 3D experience, but I am getting the error

Hi, everyone. I have been working on including simulation results (specifically CFD results such as velocity vectors and pressure fields) to an experience, and I haven't been able to publish the experience. If I delete the simulation results actor, I can successfully publish the experience, although it doesn't open when trying to open it in the 3DLive App (it crashes). Anyway, I don't understand why I am not able to publish the experience with the simulation results. I tried with different

Introduction to MAD values DSPBR material texture's appearance can be adjusted with the so-called MAD (Multiplication and Addition) values, which modify each texel by multiplying it by a fixed scaling and then adding a constant. Problem statement The MAD values of disabled textures modified the appearance of materials until DELTAGEN 2022x. This behavior was confusing, because the properties of a disabled feature (in this case the texture) should not be taken into account. For this reason,

Hello, For the production of certain parts I would like to add a quality check table to my drawings. I would like to save this table as a block, however i have encouterd some problems with creating and saving this table as a block. What would be the best way to create this block?

I was using picking point in measuring tool, the edge of the part is not getting highlighted. which intern results in approximate value w.r.t other surfaces. Any solutions please let me know.

I am working with CFD simulations results in Creative Experience and I have been able to insert them as an actor. Is there any documentation that can provide some guidance on how to use the results animations (generated within the Physics Results Explorer app using the Experience Content tool). I have been trying to do so for a while without success. I have observed some weird behaviors when trying to work with them: the very first time I inserted them I was able to see the velocity vectors, but

The developed image is describing SolidWorks (thanks to AI) for my website https://www.hamiltonbydesign.com.au From your prospective does this image describe SolidWorks or what do you think something is missing?

Hello, I'm trying to improve the loading screen in my interactive bus project. I wanted to implement the progressLoadingImage parameter, which is also available on the Experience Player Documentation site, in my project. progressLoadingImage="Image1.png" progressLoadingBackImage="Image2.png" I created two different visuals as requested. Actually, I achieved the desired result based on the test I performed in the admin panel. However, when I cleared the cache and checked on my website, the

Bonjour, Je cherche la suite de cette frise Peut-être que c'est pas encore publié...

Wishing you a joyful holiday season filled with happiness, health, and success. Here’s to a New Year where bold ideas drive powerful impact! 👇Click the image to dive into our hidden-objects game!

AAKRUTI Innovation Competition empowers 10,000+ students across 37 countries to design, simulate, and innovate on the 3DEXPERIENCE Platform—building future-ready engineers through real-world learning. AAKRUTI Innovation Competition is the only student-led, end-to-end design and innovation contest powered on the 3DEXPERIENCE Platform. It has transformed from an India-only initiative in 2011 to a global innovation movement spanning 37 countries — making the future workforce ready today. AAKRUTI

This post is meant as a short guideline to diagnose and address issues with the 3DEXPERIENCE Launcher and to provide a proper way to reach out for help if the problem can't be easily solved. 1. Check System Compatibility When you encounter any problems with the 3DEXPERIENCE Launcher make sure that the minimum system requirements are fulfilled. The easiest and quickest way to check the compatibility of your environment with 3DEXPERIENCE platform is the Cloud Eligibility tool. Hardware &

After the 2026x update, I realised I had lost all my roles. I tried to restore them, but it didn’t work. For example, when I attempt to grant myself the Engineer role, it says I need the 3D Swymer role. However, since I already granted that to myself, I’m unable to assign the Engineer role.

Who can I ask to get access to the Edu Hub material. - I am the 3Dx platform Admin 😄 Edu HUB Experience | Creative Experience

Hello to all, I am trying to access my account in 3D experience and start up my SolidWorks app, but there is a problem my account has expired and I don`t know from where and how I can renew it, any suggestions how to proceed ? Thanks in advance to all!

Hello everyone, How can we make the VR controllers suitable for Meta Quest 3? I'm not talking about the appearance of the controller. I can solve this with the 3D models I got from Meta's page. What I'm talking about is; how can I change the buttons of the controllers specifically for Meta quest 3? Can I assign keys to the buttons? For example, I have a bus project. I have placed it in a 3D city. I added a Car Controller. Let's say I want to drive this in a VR environment. How will I do that?

Is the role '3D Demonstrator' also capable of creating assembly instructions and vector graphics, similar to what I am accustomed to in SOLIDWORKS Composer? While I notice a very similar interface in 3D Demonstrator, I also see greater potential due to its direct integration with the 3DEXPERIENCE platform and the extended possibilities to expand into the VR world.

Hello, While working on my other project, I wanted to make the aircraft door openable. For the door to move, its origin must be at the hinge center. I used 3D Actors to achieve this. (This process is manual and can sometimes be time-consuming; perhaps the origin could be automatically centered based on edge/face selection as a development feature.) Opening the door isn't difficult, but in real life, a mechanism is needed to open it. My model had components that formed the mechanism. After making

Hello everyone, I have completed the first phase of my Bus project, designed for VR and the web. Although I had previously experienced performance issues with the hardware, my experience with the project I tested recently was incredible. In the second phase of the project, I will further develop it using the features available at Human Animation Studio. Additionally, I am also working on a private jet project. My goal is to combine these two projects into one. In the jet project, I will show the

Enjoy our new desktop wallpaper for Q4 - featuring a detailed rear view of the new Hyundai IONIQ 6, rendered with DELTAGEN 2025x! Resolution: 2560 x 1440 Resolution: 3840 x 2160

Hello, I've been experiencing this problem for months. It's not a new situation. It's not specific to the model. I've tried many things in the render settings. I've tried it on three different computers. But every time, the result is the same: the program closes completely. I'm sure it worked before, but whatever happened, it doesn't work anymore.

Hello, I finally managed to access xOptimizer. But I think I misunderstood something, or maybe it can't do exactly what I want? Can the split shape feature split the chair shown in the image into two parts? I want to make the fabric area a separate body and the plastic area a separate body. Is this possible? I can do this with different software, but my goal is to overcome challenges throughout my project using 3DEXCITE solutions.

Hello, How can I keep the buttons in the same position? The buttons change position when the screen size changes. It would be great if the buttons scaled automatically based on the device's aspect ratio, but I don't think that's possible right now. I'm looking for a solution to this problem because I can't make the Color Picker smaller either. Test it: https://blog.championxperience.com/interactive-bus-experience/ (Please don't share) Big Screen Normal Screen Big Screen Normal Screen

Hello, As you can see in the video, I decide which camera will be the current one by clicking on the buttons in the top menu. Additionally, to enhance the experience, I created four different Third Person Cameras. I also connected these to the Camera Manager. Pressing 1, 2, 3, or 4 on the keyboard switches to the corresponding camera. Since I started using the Camera Manager, clicking the buttons in the top menu no longer switches to that camera. It only performs the task associated with that

Turbocharge your knowledge with our short videos and become a champion in no time! Season 5 - 2025 QUICK TIP TITLEVIDEO Web Experience Publication Visual Quality Best PracticesCXP Rendering Tips and TricksHow to Work with Product AnimationsScripting in Creative Experience - How to Idle Hover in CXPTechnical Illustrations with xHighlight Season 4 - 2024 QUICK TIP TITLEVIDEO New NRE RTX Render Features & Using Presets Three Ways to Create Camera Flights Creating and Sharing

Hello, Creative Experience has not been functioning properly since the update. I'm working on a project and it's about to crash for the fourth time. The data isn't large. The operations I'm performing aren't complex calculations. Why did it freeze as shown in the image? I clicked to switch from one tab to another. I'm waiting for the freeze to pass, but it doesn't, so I have to close it and reopen it. When I restore, it recovers my data, but I don't know how to proceed with the project this way.

Hello, I am working on a project and want to split the bodies. After researching, I learned that we can do this with xOptimizer Pro. The following two posts in the community were very helpful. I have obtained the required role. Even though I have the necessary roles on two different tenants and have applied the update that came after acquiring the role, the Product Processor command in the Rendering Scene Design application did not appear on my application screen. I even reinstalled it

Dear 3DEXCITE User Community, As 21x FD02 was released recently, we would like to give you some updates on the enhanced 3DEXCITE Roles. Feel free to provide feedback or ask questions in the comment section of this post. 3D Render (DPA) 3D Render xStudio user experience has been enhanced to guide users for triggering the correct rendering by directly visualizing a preview of the final rendering in the Render Export dialogue. xStudio provides now better responsiveness in the Render Export

These are the main updates for the 21x FD01 release: Marketing Model Creator (XCO) MarketingModelCreator The enhancements of the Marketing Model Creator improves consistency for all downstream media productions and speeds up your workflow. Multi-selection and multi-editing functions for actors & templates speedup the creation process Improved editing and enhancements on templates enable users to create and share animations efficiently Create ambiences with dynamic resolution-scale with a source