Hi Guys

I know this question has been asked before, but I've got a slightly different slant on it.

I've dusted off our ancient Epson Stylus Pro 7600 .  It don't get used very often and I've measured the results.

I've searched in vain for a way to calibrate the printer itself, so I guess I'm stuck with altering my drawing.

I've done the maths and I need to scale by 0.9990% horizontally and 1.0007% vertically.

I know these numbers are small, but it's surprising how they add up..  about 1.5mm error.

I was hoping there was a way to maybe save my drawing view as sketch and then apply a scale in these two directions.

I couldn't find a way to do that.

I really don't want to scale my model itself, especially as the drawing view is rotated to fit on the 24" paper roll.

At the moment the only solution I can think of is to somehow put the sketch on a plane that is tilted to the top view, seems like a birovapolava to me, so does anyone have any brighter ideas?

Thanks

Rob