Hello everyone! Recently i've noticed that my flow simulation results are a bit incorrect. So i decided to do a little test: I took an official BlueRobotics T200 Thruster model and simulated it.
On the website it is written, that the maximal thrust is 11.2 lbf (which is equal to approx 2.5 N). This force is being achieved with thruster spinning at 3800 RPM
But in my simulation with all boundary wall conditions im getting 71 N. That is too much i think.
Below you can see my (Z) Force data. And in this file you can see the whole thing: Dropbox - T200-Thruster-Simulation.zip
(It's too big to be attached, sorry, simulation results take up 1 GB)
| Goal Name | Unit | Value | Averaged Value | Minimum Value | Maximum Value | Progress [%] | Use In Convergence | Delta | Criteria |
| GG Force (Z) 1 | [N] | -47.20010154 | -71.36520788 | -108.9670421 | -34.41372467 | 100 | Yes | 74.55331748 | 635.8106529 |
I'm really new to all this simulation stuff, and can be doing something wrong... Will be grateful to any help!
SolidworksFlow Simulation