Parametric Spur Gear

I am playing around with redesigning the extruder feeding mechanisim of my 3D printer.  As part of my redesign I am looking at creating a different gear ratio between the stepper motor and the drive bolt so I am creating a spur gear model.  I would like to print my new gears using my 3D printer so I would like the models to be accurate.  Just for extra fun I am trying to make the model parametric, however I am having a few issues with features that are not updating properly with new parameters.

The model is defined by 3 parameters:

1.) Pitch Diameter

2.) Pitch (teeth per inch)

3.) Pressure Angle

All other features are defined by equations (except face width - I haven't parameterized that one yet).

I have attached the model for reference.  Here are the issues I am having:

1.)  In the sketch titled "Involute Curve", the right side of the gear tooth is defined by an equation driven curve and the left side of the tooth is defined by a mirror of the equation driven curve.  When I update the input parameters to the gear file the equation driven curve is updated but the mirror isn't.  Is there a way to update the sketch mirror when the model parameters are changed?  I know that a work around is to define a second equation driven curve, but I like the efficiency of using the mirror function.

2.) In the circular pattern, the number of pattern itterations and the angular offset of the pattern are both defined by equations (which I used to create named variables).  In the feature dialoge box I can type in the name of the variable and the correct value will be calculated and replace the name of the variable that I typed.  When I update the model parameters the circular pattern features won't update.  Is there a way to link those feature parameters to equation driven variables?

Thanks,

Tom

SolidworksParts And Features
Answers 7
SF
SF 2014-04-18 Best Answer

1.) Can you confirm that your mirror-ed sketch components are fully defined (lines all black)? I've often run into cases where I'll sometimes accidentally delete or modify the mirror relations when I make changes later. The most common issue I've personally seen w/ parametrically-driven mirrored features is where the new mirrored components are still "floating" in space.

2.) Assuming I'm understanding your question correctly, you can tie pattern parameters to equations by left-clicking on "Annotations" in your feature manager on the left and enabling "Show Feature Dimensions". This should allow you to view/select all dimensions in your part, and then you can double click on those dimensions and assign relations.

I've also attached a parametric spur gear model that I've been using. You'll see that it suffers from its own idiosycracies =P

JF
JF 2014-04-18

Hi,

1) Try mirror sketch entity in Tooth-profile sketch, not in Involute-curve sketch. Select equation driven curve, convert entity, then mirror.

RS
RS 2014-04-18

Mirored equation-driven curves lose their associativity.  I make a surface from the involute curve and mirror the surface.

SF
SF 2014-04-18

1.) I did go an constrain the mirrored sketch, so it's position will update when I change the parameters but the shape won't update to match the new invoulte curve.

2.) I was able to do this for the number of pattern repetitions, but not for the angular offset.  However, when I looked at your model you used a slightly diffferent method that was effective - you set the angle to 360 degrees and had equal spacing and that did what I wanted.

Thanks,

Tom

SF
SF 2014-04-18

Both of what Jan Forkovic and Roland Schwarz suggested will work as alternatives to the mirrored sketch.

Thanks,

Tom

MF
MF 2018-09-12

Great job!!

in this macro I did a symmetry and then fix it, but it could also be another involute equation.

DD
DD 2018-09-12

I looked at the other files posted here because I want to get more comfortable with using equation-driven curves, but I'm not thrilled with these.

1. Global gear variables should be the Pressure Angle, Number of Teeth, and Module (for metric) or Diametral Pitch (for inch).

2. Any and all dimensions used in an equation should have a proper and descriptive name!!  D1@sketch2 in the equations table is very poor practice.

For those looking at this thread for a good parametric gear model I offer this one (attached).