Multibody Part Numbering Help

I’m having a problem with multibody parts part numbering.  So, I have a multibody part with three configurations (Default, Left Hand, & Right Hand).  I added a part number field to the weldment cut list properties and added part numbers for all configurations.  When I change to the LH or RH configurations, SolidWorks changes the body’s part numbers on some of the bodies.  I have each body part number set to this configuration where needed.  I’m guessing this might be due to the bodies being identical, but only being bent the opposite direction dependent on the configuration, but not 100% sure.  I’m trying to get them to keep my numbering, so the weldment cut list table matches what I put for the body’s part numbers.  When I insert the weldment cut list into the drawing, I lock the item numbers and use them throughout the drawing with addition weldment cut lists that reference only the bodies shown on the current sheet.  When the drawing rebuilds or is saved, it causes addition item numbers to appear in the tables and/or changes some of my part numbers.  Is there a way to prevent SolidWorks from updating the body’s part numbers I have already assigned or maybe a better way of accomplishing what I’m trying to do?