is it possible to flatten a multi-segment or multi-body cyclinder in solidworks?
what we are trying to achieve is a tank made from a large number of sheets welded together with a large number of nozzels and attachements. so to make the diameter we have 4 sheets welded end to end to make a strake and then we have 6 of those strakes welded on top of each other to form the height of the tank. the top and bottom strakes have a heap of nozzels for instuments and outlets etc to go into them. the locations of which are driven by degrees around the tank.
to add to the complication we then have 3 different tanks all with different nozzel locations. what were wer hoping is that we could do one model and then do a save as and change the nozzel locations (driven by degrees around the tank) and then do another save as and do the last tank.
what we would like in the way of drawings is a flat view of the entire tank showing all the individual sheets with all the holes to show the layout of the sheets with relation to each other. that drawing then tells the fabricators where to look for the drawings of the individual sheets and the hole details. for this reason i am thinking it would need to be one multi-body part of the tank to achieve the first drawing and then only import the body you want to detail to do the individual drawings. and at this stage that is waht i am working at but not having much luck.
i have also noticed i can do the hole details at an assembly level, but the holes don't transfer to the parts for the flat pattens so i am thinking that won't work at this stage.
any thoughts on how i might be able to achieve this?
thanks in advance for any help.
SolidworksParts And Features
Josh,
There is a box to check when you make an Assembly Cut that will propagate the cut to the part.
Jerry S.
thanks for the heads up Jerry. i should have known to look for something like that. couldn't see the forrest for the trees i guess. that may help if i hit a wall doing it the way i am now and i will certianly keep that in mind for future reference!
i have changed my thinking a little and am working toward doing this as a flat part with a table doing the math to work out hole locations and sizes, then using the flex command to "wrap" the tank. it appears that this is the best most stable way so far. it is a hard way to do it as there is a fair bit of trigonometry involved to work out hole sizes of angled pipe entrys and i was really hoping that some sketching could work that out for me. i will post here to let others know if it works the way it appears to so far.
i would still be really interested to know if there is an easier way to work this out.
Josh,
It seems like Sheet Metal functions would work well for your design. You can add the holes in the rolled up form, then Flatten the parts. One trick is that round holes distort in the flat, so it is sometimes a little tricky to do your dimensioning. People often want the holes in the flat to be round, so the holes in the round are slightly distorted. I think the usual work-around is to make the holes in the round slightly small, then punch the correct round holes in the flat. Getting the holes centered is a little tricky, since one set isn't round and doesn't have a center temporary axis. But it is all doable.
Jerry S.
P.S. It looks like Deepak has you headed in a good direction in the other thread.