Morning all,

I am making a wire harness and the asm drawing for it as well.  The drawing has a few different configurations which have their own exploded views.  There is a BOM table associated with this drawing which calls out the plastic plug, the pins for the plug, heatshrink, the TWISTED pairs of wires, and a couple of small pcbs.  The reason for the caps on twisted was because there are 4 twisted pairs.  Five different colors of wires.  Four black wires(GND) and four other colors that are each twisted with a single black wire.  Each color has its own part number.

I made the 4 twisted pairs as a single part using the sweep with twist along path option.  Now I see that I cannot break the BOM table from the twisted pair part so as the balloons do not follow what I type into the table.  Is there a way to separate the features in the twisted pair part into separate parts giving them their own part numbers so they show up on the BOM as individual part #'s?  Or easier, how do I break the associativity between the BOM table and the draw3ing view?

Thanks

Sid