WHY WOULD SW10 BE PUTTING IN A DRIVE TYPE OF “HEX WITH DRILL HOLE” EVEN THOUGH IT IS NOT SELECTED?  THIS IS HAPPENING ON ALL NEW METRIC SOCKET HEAD SCREWS CREATED IN AN ASSEMBLY.  WE ARE RUNNING IN A NETWORKED ENVIRONMENT, WITH THE TOOLBOX PROPERLY SETUP ON THE NETWORK.  IT LOOKS LIKE THE HOLE FEATURE IS NOT BEING SUPPRESSED NO MATTER WHAT SIZE SCREW OR IF YOU SELECT JUST "HEX" OR "HEX WITH DRILLED HOLE".

EVEN THE CONFIGURATION NAME DOES NOT REFLECT THE DRILLED HOLES.