My client gave me a PDF file. From which was able toreplicate the design in SW. However, I need to flatten this patternso the fabricator can correctly place mounting holes prior toforming it.
The material will be 1/4" thick acrylic heat formed. A piece of .04aluminum will be glued to the surface after forming. The aluminumis the piece we need to flatten.
Any ideas?
thanks in advance
'c'
CLICK todownload zip fileSolidworksSheet Metal
The material will be 1/4" thick acrylic heat formed. A piece of .04aluminum will be glued to the surface after forming. The aluminumis the piece we need to flatten.
Any ideas?
thanks in advance
'c'
CLICK todownload zip fileSolidworksSheet Metal