I'm attempting to convert AutoCAD LT 2010 drawings into SW, which has been working relatively well for me, except for certain parts which have lugs on them. By "lugs" I mean that these parts are made from extruded 6061-T6 aluminum, which has 3 "lugs" on the extrusion. These are cylindrical parts, with an inside diameter. The issue I am having is that I am able to convert the parts into SW, select my contours, and use the Revolved Boss/Base feature in order to create a 3D part from the imported drawing, however when I select the lugged area of the sketch for a contour, the lugs then become one continual entity around the OD of the part. I need to have these lugs as 3 separate entites spaced around the OD of the part. Any expertise is appreciated...
SolidworksParts And Features
Jim,
When you create a feature, the sketch is hidden by default. If you unhide the sketch, you can use it again to create another feature. In the Feature Manager/Design Tree expand the feature and right click on the sketch and choose the eyeglasses icon to unhide it.
So, you could have a single sketch that is reused to create the 3 separate lugs.
You are not limited to revolves, nor having to revolve a full 360°.
One lug could be created through a partial revolve and then patterned around the cylinder. Or once the cylinder has been created, the lugs could be extruded.
If you post images of the 2D drawings, you may get more helpful information.
Chris, Kelvin. Thank you both for your patience & help. I will update after applying these ideas. .