(Reposting to the weldment topic):
I'm using the weldment tools to create the box frame pictured below with square tubing. Now I want to weld some 1" x 0.625" angle to the right and left side to make a nice flat flange facing out. The section view shows how I put the angle in. On the right side it works great, but on the left side of the box, the angle is not oriented with the flat side out. Rotating the profile doesn't cut it becuase the angle has different leg lengths. There must be some way of doing this without making a new mirror-imaged profile. Is there a smart person out there that can figure this out?
I'm using SW2007 SP 2.2SolidworksWeldments
I'm using the weldment tools to create the box frame pictured below with square tubing. Now I want to weld some 1" x 0.625" angle to the right and left side to make a nice flat flange facing out. The section view shows how I put the angle in. On the right side it works great, but on the left side of the box, the angle is not oriented with the flat side out. Rotating the profile doesn't cut it becuase the angle has different leg lengths. There must be some way of doing this without making a new mirror-imaged profile. Is there a smart person out there that can figure this out?
I'm using SW2007 SP 2.2SolidworksWeldments
