We have some Dell Precision 360's P4 3.2GHz with QuadroFX3000's, 1gig ram, XP Pro SP2. Since upgrading to 2007,whenopening drawings (even a simple component detail), SolidWorksjusthangs and never finishes opening the file. WindowsTaskManager shows the processor at idle.
If run in 'Software open GL' checked, files open fine,indicating agraphics driver issue. I'm using the recommended driverfrom theSolidWorks site, 7.5.5.6 (this driver has a dateof7/13/ 2005).
I believe the previously installed driver from thenVidiawebsite was newer, and worked well with SW2006. Ichanged tothis one due to the issues described above but have seennochange.
Anyone using a different/newer driver for this cardwithoutissues?
SolidworksAdministration
If run in 'Software open GL' checked, files open fine,indicating agraphics driver issue. I'm using the recommended driverfrom theSolidWorks site, 7.5.5.6 (this driver has a dateof7/13/ 2005).
I believe the previously installed driver from thenVidiawebsite was newer, and worked well with SW2006. Ichanged tothis one due to the issues described above but have seennochange.
Anyone using a different/newer driver for this cardwithoutissues?
SolidworksAdministration
