I have made a shape using loft between two sketches after that I extruded the top a little bit and then cut it using revolve cut. the top end is suppose to be attached to the bottom of a tank end so that is why it has that Pringle like shape. I need to produce it in sheet metal and then flatten it to get the dimensions of the blank sheet so that it can be manufactured. I have been trying to make it in sheet metal for over a month and have been unable to do so. Please help me out and let me know how it can be done. if there is an alternate way to do it I would be happy to follow that using sheet metal or surfacing etc. I will really appreciate any help. Thank you so much
As part of the migration from the legacy Forum to the new SOLIDWORKS Forum, there was an overlap in timing where the new Forum was being loaded with historical data from an export migration, while at the same time, the legacy Forum was still operating during the period of March 12th to March 31st. Due to the overlapping timelines and import-export technical issues, posts during that time-frame could not have their media imported. If you created a post in the legacy Forum during that time-frame and wish to update the post in the new Forum with supporting media, please go to your post in the new Forum, enter into Edit mode and re-add any supporting media you want to insert.
The easiest way to find your posted content is: from the new Forum, click on your profile icon in the top right of the GUI, then select "My Profile" and you will be taken to the "Overview" tab where you can see all of your posting history.
Thank you