MODSIM ​​​​​​​3DXCONFERENCE Modeling_and_Simulation_from_an_Industry_Perspective 

I am pleased to invite you to Ali Kiapour's presentation 

on the Global 3DEXPERIENCE Modeling and Simulation Virtual Conference on November 17th & 18th. Please register now!

https://events.3ds.com/global-3dexperience-modeling-simulation-virtual-conference

The presentation: 

"The advent of 3D printing has dramatically changed the process behind hemipelvectomy where a damage pelvic bone in the hip is replaced with fixation implant. The patient-specific, 3D-printed implants allow the opportunity for optimized bone ingrowth surfaces, can perfectly match a certain patient’s pre-existing anatomy, and allow for osseointegration at the connection points between the bone and implant (Xia et al., 2019). In the long run, using a 3D-printed prosthesis gives better patient outcome and maximizes a patient’s quality of life after the procedure has been completed. The objective of this study is to evaluate the biomechanical effect of the patient specific truss-based Hemipelvis implant on pelvic segment. A 3D-printed patient-specific hemipelvis implant (4WEB Medical Inc.) was designed to replace approximately 40% of the pelvis of a 33-year-old male, who was originally diagnosed with a low-grade chondrosarcoma in the left pubic bone.
A FEA analysis was done on the implant using image based modeling approach using Simplware’s Synopsys software to compare the load sharing and biomechanics of instrumented hip bone under physiological loadings."

Presentation Replay

You can find all event presentations on the wiki page: