So, whenever I have a part drawn in SolidWorks that will need a flat pattern, I always go to AutoCad to make my flat pattern. I have noticed in SolidWorks that the more the degree there is the further the bend line is off. For example, on a 90° bend the lines are off 1/16" (which doesn't seem like much until you have multiple bends) but on a 45° bend it may only be off 1/32". This makes me believe that the bend lines on the flat pattern are being generated from the centerpoint of the radius and not the inside corner where the bend meets the plate. Is there a way to change where the bend lines are being generated from?