Chittagong  Bangladesh 

Bangladesh Army University of Science and Technology (BAUST);

Study Field: B.Sc. in Mechanical Engineering (Currently CGPA 3.84 out of 4.00); Ranking First in the Faculty

Design & Simulation Projects (Affiliated with Dr-Ing. Irfan Ahmed, Associate Prof, University of Kassel, Germany):

1. Design, Construction and CFD Analysis of a Single-Stage Propeller for Fixed Wing UAV 

   A Single-Stage Propeller was adapted from QBlade using Blade Element Method. Using Slicing Methods, it was transferred to SolidWorks for analyzing the Structural (Aerodynamic Loads) using SolidWorks Simulation. A basic Flow Model was simulated using SolidWorks Flow Simulation. Later on, CFD Analysis was run using Simulia for better verification of obtained results.

2. Design and Numerical Validation of a Helical Shell and Tube Heat Exchanger for Enhanced Heat Transfer

   A complex structure Shell and Tube Heat Exchanger was modeled using SolidWorks and assembly parts. Numerical investigations were carried out after running the model in SolidWorks Flow Simulation. In second case, I added Helical Baffles on the model, which impacted on the Heat Transfer analysis increasing the LMTD, Heat Flux and Surface Area conduction. Later, it was visualized and re-simulated for better accuracy using Simulia.

3. Design, Numerical Investigation and Comparison of Toroidal Propeller with Single-stage and Double-stage Counter Propellers.

   In this Project, I used SolidWorks to model three propeller geometry. Extracting NACA 4410, two distinctive Propeller blades were generated. Another profile was created using Surfacing for Toroidal Propeller. Using SolidWorks Simulation, the aerodynamic loads were analyzed. In the outcome, Toroidal Propeller had greater Lift with reduced Drags. On the other hand, Double-stage propeller scaled to a greater Gliding ratio due to changing the Angles and Counter section of the blade.

More Design Projects (Associated with University Works, Capstone and Learning with SolidWorks)

1. Fatigue Analysis of I-Beam, T-Beam and L-Beams for Impact Loading Purpose using SolidWorks Simulation: Structural Analysis and Fatigue Analysis
2. Effect of Thermal Degradation in Composite Rings due to Conduction and Free-form Convection using SolidWorks Simulation Professional: Thermal Analysis
3. Design and CFD Validation of an External Hybrid Cooling System for Local Smartphones: Using SolidWorks Flow Simulation

Community Links and Posts:

1. 3DEXPERIENCE EDU Student (Design Content): Bearing Coupling Modification for Spinning Machine Maintenance in PHC Pile Production, Samuda Construction Limited, TK Group of Industries, Bangladesh
   

2. 3DEXPERIENCE EDU Student (Design Content): APEX Dynamics Planetary AF222 Gearbox Design & Assembly for Production-based Machines

3. 3DEXPERIENCE EDU Student (Article): Why should you choose DraftSight for Advanced API and 2D CAD Tree Management?

4. 3DEXPERIENCE EDU Student (Articple): Course Syllabus merged with Dassault Systemes Certification Criteria (BAUST CAD Society):

5. What ENOVIA Collaborative Innovation Design really means? Article on "3DEXPERIENCE Certification: ENOVIA Collaborative Industry Innovator Associate" - ENOVIA User Community

   https://r1132100503382-eu1-3dswym.3dexperience.3ds.com/community/swym:prd:R1132100503382:community:38?content=swym:prd:R1132100503382:communitypost:kFTqQ4qkTo-PMy3YopsqDA

6. Aquarium Heavy Duty Frame using Weldments (Idea: Question)

7. New Exam section added for Beta-Testing Invitation by Dassault Systemes DraftSight:

8. Basket Bin Glass-Folded Automation Design Idea

   https://r1132100503382-eu1-3dswym.3dexperience.3ds.com/community/swym:prd:R1132100503382:community:53?content=swym:prd:R1132100503382:idea:s2pnUvsXQr6UK4rKaCzwXA

9. MODSIM MANIA 2.O - Receiving Temporary 3DEXPERIENCE Sponsorship

10. GrabCAD Community (Owner): 

    https://grabcad.com/groups/grabcad-community-user-group-bangladesh-army-university-of-science-technology-baust-bangladesh

Rendering Projects and Real-life Design Applications:
1.    Room Hanging Shelf Decoration for Real Construction (I designed this for my own Room)
2.    Rendering Project: Bardeinhum Diffuser Model (A Rare obliterated Device inspired from a German Paper)

Render Focus: Internal Environment, SolidWorks Visualizer
3.    Rendering Project: GT Adaptive Classical Perfume Bottle

Render Focus: External Environment, KeyShot
Learning Contents:
1.    International Webinar: "Sheet Metal BLITZ 2025" - Affiliated by "Bangladesh 3DEXPERIENCE and SolidWorks User Group Network"
2.    Teaching Assistant, Department of Mechanical Engineering, BAUST- Course ME 2210: 3D Solid Modeling

3. BAUST CAD Society - "3-day Workshop: Tips and Techniques to Pass CSWA Examination" (Instructed by Me)

4. BAUST CAD Society - "Course: 3D Solid Modeling for Beginners 2023/2024/2025" (Instructed by Me)

5. BAUST CAD Society - "Webinar: What do you should know to become a 3DSwymer Associate" (Instructed by Me)

6. BAUST CAD Society - "3-day Workshop: Adapting Engineering Methods with SolidWorks Simulation" (Instructed by Me)

7. 5-day Rapid Designing Session for Model Mania Participation 

8. SWUGN: Bangladesh 3DEXPERIENCE and SolidWorks User Group Network - "Partnered Webinar: SolidWorks CSWPA Sheet Metal- 10 Tools That Matters" (Instructed by Me)

Assignment: I have prepared own Questions that completely merges with the Syllabus and Exam Structure of CSWPA Sheet Metal: 

9. GrabCAD Tutorial: How to Design the Bracket Part in Shortest Time (For CSWA Quick Tips & Tricks)

Professional Achievements from Dassault Systemes:
1. CSWPA - Advanced Weldments Professional
2. CSWPA - Advanced Sheet Metal Professional

3. CSWPA - Advanced Drawing Tools Professional

4. CSWPS - Simulation Professional
5. CSWP - CAD Design Professional

Rare Achievements from Dassault Systemes:

1. Certified DraftSight Professional (CDSP) - a new exam introduced in September, 2025 - First achiever from Bangladesh
2. Certified DriveWorks Solo (CDSA) - Professional level in Design Automation, First achiever from Bangladesh
3. Certified DriveWorks Xpress Associate (CDWXA) - DriveWorks is a Certified Gold Partner of Dassault Systemes, and one of the best add-ins of SolidWorks

3DEXPERIENCE related Certifications:

This is to mention that. I have the Eligibility Code (Certificate) for participating in "3DEXPERIENCE Professional Exam Certifications" anytime:

1. 3DSwymer Associate

2. 3D Mold Creator Associate

3. 3D Sculptor Associate

4. 3D Creator Associate

5. ENOVIA & SOLIDWORKS- 2 Certifications from Collaborative Design, Innovation Associates
   

Communities, Involvements and User Group:

1. I work as a Representer and Associate Communicator of "Bangladesh 3DEXPERIENCE and SolidWorks User Group Network"
2. Actively Participated for Learning opportunities from various User Group such as: Mansoura SWUGN, Hyderabad SWUG, Bengaluru SWUG, Jogja SWUGN, Tolugu SWUG, Islamabad SUG etc. and achieved about 20+ Participation Certificates.
3. Actively Participated in Bootcamps and Workshops organized by Islamabad SUG, BD-SWUGN, Benin SWUG, IDEA etc. and achieved 5+ Participation Certificates.
4. I work as Chief Executive Officer and Associate Instructor of "BAUST CAD Society" - a University Club where I focused every students to grow their learning in SolidWorks.

5. OUTCOME: More than 50 students were able to achieve "CSWA/CSWP - CAD Design" Certification under my Mentorship. Besides, 11 students achieved "CSWA - Simulation" under my mentorship.

6. I helped my faculty (University) to adapt Syllabus of CSWA and CSWP provided by Dassault Systemes SolidWorks, for enhancing the Students to learn "SolidWorks" academically and prepare for Certifications.
7. I focused on Academics of SolidWorks and Research principles of Design, more than giving efforts and taking time on making good relevant designs, show-casing designs.

Verify at my LinkedIn Profile: 

My Portfolio Website:

Industrial Design Learning Experiences:

1. Govt. Bangladesh Railway - Central Locomotive Workshop (Industrial Training)

   Learned about Design Criteria for Manufacturing and Assembly/Disassembly of Locomotive Components.

2. Govt. Coal Mining Company - Boropukuria Coal Mining Powerplant (Industrial Attachment)

   Learned about Boiler Designs, Coal Mining Ventilations and Lifting process

3. Confidence Powerplant, Rangpur, Bangladesh

   Die Injection Molding using SolidWorks, How to process with SolidWorks Design Tolerances for Manufacturing

1. SOLIDWORKS (Simulation, Flow Simulation, Sheet Metal and Weldments)
2. SIMULIA (Thermal Analysis, Structural Analysis and HVAC-CFD)

3. Abaqus (Composite Materials Analysis- Tensile Testing, Impact Testing, Fracture Analysis, Torsion Analysis and Flexural Testing)

   Sheet Metal Teaching Workshop SIMULATION Materials CFD Academics